Fiat wheels on Toyota - hub centric rings

Hub centric rings for Fiat wheels (CB 58,1 mm / 58.1 mm, PCD 4x98) on Toyota hub (CB 54,1 mm / 54.1 mm, PCD 4x100)

Original Fiat alloy wheels have a center bore of 58,1 mm and a bolt pattern (PCD) of 4x98. These wheels can be fitted to Toyota vehicles with a hub diameter of 54,1 mm and a bolt pattern (PCD) of 4x100, but proper installation requires additional components.

You will need two products:

1. Hub centric rings – used to match the wheel center bore to the vehicle hub. They fill the gap between 58,1 mm and 54,1 mm, ensuring the wheel is properly centered. Without hub rings, the wheel may not sit correctly, which can cause vibrations and negatively affect driving safety.

2. Wobble bolts or wobble nuts – required to adapt the difference between the PCD 4x98 of Fiat wheels and the PCD 4x100 of Toyota vehicles.

All hub centric rings in this category are designed for Toyota hubs with a diameter of 54,1 mm and Fiat wheels with a center bore of 58,1 mm.

Wobble bolts or wobble nuts compensate for the difference between PCD 4x98 and PCD 4x100.

Wobble bolts in stock – available HERE

Wobble nuts in stock – available HERE

Need help choosing the correct setup? Contact us — we provide fast and reliable technical support.
Please note:
- Some older or less common Fiat or Toyota models may require different specifications — contact us to confirm compatibility.
- If you are unsure about fitment, feel free to reach out — we are happy to help.