Honda wheels on Skoda - hub centric rings

Hub centric rings for Honda wheels (CB 64,1 mm / 64.1 mm, PCD 5x114.3) on Skoda hub (CB 57,1 mm / 57.1 mm, PCD 5x112)

Original Honda alloy wheels have a center bore of 64,1 mm and a bolt pattern (PCD) of 5x114.3. These wheels can be fitted to Skoda vehicles with a hub diameter of 57,1 mm and a bolt pattern (PCD) of 5x112, but proper installation requires additional components.

You will need two products:

1. Hub centric rings – used to match the wheel center bore to the vehicle hub. They fill the gap between 64,1 mm and 57,1 mm, ensuring the wheel is properly centered. Without hub rings, the wheel may not sit correctly, which can cause vibrations and negatively affect driving safety.

2. Wobble bolts or wobble nuts – required to adapt the difference between the PCD 5x114.3 of Honda wheels and the PCD 5x112 of Skoda vehicles.

All hub centric rings in this category are designed for Skoda hubs with a diameter of 57,1 mm and Honda wheels with a center bore of 64,1 mm.

Wobble bolts or wobble nuts compensate for the difference between PCD 5x114.3 and PCD 5x112.

Wobble bolts in stock – available HERE

Wobble nuts in stock – available HERE

Need help choosing the correct setup? Contact us — we provide fast and reliable technical support.
Please note:
- Some older or less common Honda or Skoda models may require different specifications — contact us to confirm compatibility.
- If you are unsure about fitment, feel free to reach out — we are happy to help.