Lancia wheels on Mazda - hub centric rings

Hub centric rings for Lancia wheels (CB 58,1 mm / 58.1 mm, PCD 4x98) on Mazda hub (CB 54,1 mm / 54.1 mm, PCD 4x100)

Original Lancia alloy wheels have a center bore of 58,1 mm and a bolt pattern (PCD) of 4x98. These wheels can be fitted to Mazda vehicles with a hub diameter of 54,1 mm and a bolt pattern (PCD) of 4x100, but proper installation requires additional components.

You will need two products:

1. Hub centric rings – used to match the wheel center bore to the vehicle hub. They fill the gap between 58,1 mm and 54,1 mm, ensuring the wheel is properly centered. Without hub rings, the wheel may not sit correctly, which can cause vibrations and negatively affect driving safety.

2. Wobble bolts or wobble nuts – required to adapt the difference between the PCD 4x98 of Lancia wheels and the PCD 4x100 of Mazda vehicles.

All hub centric rings in this category are designed for Mazda hubs with a diameter of 54,1 mm and Lancia wheels with a center bore of 58,1 mm.

Wobble bolts or wobble nuts compensate for the difference between PCD 4x98 and PCD 4x100.

Wobble bolts in stock – available HERE

Wobble nuts in stock – available HERE

Need help choosing the correct setup? Contact us — we provide fast and reliable technical support.
Please note:
- Some older or less common Lancia or Mazda models may require different specifications — contact us to confirm compatibility.
- If you are unsure about fitment, feel free to reach out — we are happy to help.