Skoda with wheels from Toyota - hub centric rings

Hub centric rings for Skoda hub (CB 57,1 mm / 57.1 mm, PCD 5x112) with Toyota wheels (CB 60,1 mm / 60.1 mm, PCD 5x114.3)

Skoda vehicles are equipped with a wheel hub diameter of 57,1 mm and a bolt pattern (PCD) of 5x112. When installing Toyota alloy wheels with a center bore of 60,1 mm and a bolt pattern (PCD) of 5x114.3, proper fitment requires specific components.

You will need two products:

1. Wheel hub centric rings – used to adapt the hub diameter to the wheel center bore. They eliminate the size difference between 57,1 mm and 60,1 mm, ensuring accurate alignment and stable mounting.

2. Wobble bolts or wobble nuts – designed to compensate for the difference between the PCD 5x112 of Skoda and the PCD 5x114.3 of Toyota wheels.

These hub centric rings are suitable for Skoda hubs with a diameter of 57,1 mm and Toyota wheels with a center bore of 60,1 mm.

Wobble bolts or wobble nuts allow safe installation between PCD 5x112 and PCD 5x114.3.

Wobble bolts in stock – available HERE

Wobble nuts in stock – available HERE

Not sure which parts you need? Contact us — our team is ready to assist you quickly.
Please note:
- Certain Skoda or Toyota models may require different specifications depending on production year.
- Always verify hub size and bolt pattern before installation — contact us if you are unsure.