Toyota wheels on VW Volkswagen - hub centric rings

Hub centric rings for Toyota wheels (CB 60,1 mm / 60.1 mm, PCD 5x114.3) on VW Volkswagen hub (CB 57,1 mm / 57.1 mm, PCD 5x112)

Original Toyota alloy wheels have a center bore of 60,1 mm and a bolt pattern (PCD) of 5x114.3. These wheels can be fitted to VW Volkswagen vehicles with a hub diameter of 57,1 mm and a bolt pattern (PCD) of 5x112, but proper installation requires additional components.

You will need two products:

1. Hub centric rings – used to match the wheel center bore to the vehicle hub. They fill the gap between 60,1 mm and 57,1 mm, ensuring the wheel is properly centered. Without hub rings, the wheel may not sit correctly, which can cause vibrations and negatively affect driving safety.

2. Wobble bolts or wobble nuts – required to adapt the difference between the PCD 5x114.3 of Toyota wheels and the PCD 5x112 of VW Volkswagen vehicles.

All hub centric rings in this category are designed for VW Volkswagen hubs with a diameter of 57,1 mm and Toyota wheels with a center bore of 60,1 mm.

Wobble bolts or wobble nuts compensate for the difference between PCD 5x114.3 and PCD 5x112.

Wobble bolts in stock – available HERE

Wobble nuts in stock – available HERE

Need help choosing the correct setup? Contact us — we provide fast and reliable technical support.
Please note:
- Some older or less common Toyota or VW Volkswagen models may require different specifications — contact us to confirm compatibility.
- If you are unsure about fitment, feel free to reach out — we are happy to help.